Data Acquisition Systems
Features
Industries Served
- Military
- Commercial
- Fixed-Wing
- Rotary-Wing
H397 Series Data Acquisition Unit
Howell’s H397 Series Data Acquisition Unit is an instrument for collecting engine sensor and aircraft system data for recording or display in the cockpit. Each DAU contains one or two Engine Interface Units (EIU) that can each act independently to read all signals and pass the converted results to the cockpit display unit (DU). It is a fully redundant system that eliminates any single point failure.
H697 Series Configuration Module Unit (CMU)
H697 Series Configuration Module Unit (CMU) is used to configure the DAU for a specific engine/aircraft application. It is fully redundant with separated power supplies.
H397 Series Data Acquisition Unit
Howell’s H397 Series Data Acquisition Unit is an instrument for collecting engine sensor and aircraft system data for recording or display in the cockpit. Each DAU contains one or two Engine Interface Units (EIU) that can each act independently to read all signals and pass the converted results to the cockpit display unit (DU). It is a fully redundant system that eliminates any single point failure.
Specifications
H397 Series
Data Acquisition Unit
Parameters (I/O)
Parameters (I/O): Limited only by the number of pins available in the connector (79)
- Frequencies 3.5 Hz to 30,000 Hz, 0.5 Vrms to 150 Vrms
- Thermocouples, ANSI Type K thermocouple from 0 °C to 1200 °C
- RTDs (2 or 3 wires)
- DC Voltages (High or Low Level)
- Synchro
- Second Harmonic
- Ratio-metric (Engine Oil Pressure, etc.)
- Capacitive Fuel Quantity
- Discrete inputs, Switch closure to ground or 28 VDC)
- Discrete outputs, current Source or Sink limited to 0.2 amp resistive load
- RS-232, RS-422
- ARINC 429, 825
Specifications
Software Certification is to DO-178B DAL A
Environmental certification is to DO 160-G
Power: 28 VDC nominal per MIL-STD-704A. Power consumption 15 Watt Max.
TSO: C43c, C44c, C47a, C49b, C55a
Reliability substantiated to 10-9 (Catastrophic) per MIL-HDBK-217
Dimensions: 8.4” x 4.8” x 2.6”
Weight: 4.0 lbs Max
Specifications
H697 Series
Configuration Module Unit (CMU)
Specifications
Two operating modes allow for normal operation or maintenance.
Dimensions: 4.00” x 2.13” x 1.56”
Weight: 0.5 lbs
Power: 28 VDC nominal, 2 Watts Max
Gallery
Notable Clients
Have Questions?
Contact Us.
Have questions about Data Acquisition Systems? Reach out to us and we would be happy to help.